Led RGB Spot
Led RGB Spot And Mountıng Sleeves
The spots have been especially developed for the use in saunas. The protection class is IP65 and they are operated with low voltage. Furthermore the light bulb can be exchanged easily when the spots are already installed and sealed in. The spots are available in RGB or warm white. An easy installation is ensured as the spots are prepared for plug and play.
|Control signal||350 mA constant current|
|Power supply warm white||1 W|
|Power supply RGB||3 x 1 W|
|Light colours warm white||Warm white 2700°K|
|Light colours RGB||Red – Green – Blue|
|Installation boring||50 mm|
|Weight||app. 0,45 kg|
|Installation depth||150 mm|
|Diameter of the cover||60 mm|
LED RGB CONTROLLER
Controller for LED spots RGB with an operation current of 350 mA. You can connect up to 10 pieces of 3 x 1 W spots to one RGB controller. The controller can realise 15 different light programmes in combination with the RGB spots for example: White, Red, Green, Blue, Red-Green color change, Blue-Green color change, Red- Green-Blue color change, Flashlights etc. The setting of the light programmes is done by a code switch.
Optionally the light controller can be controlled externally by a four-digit digital code. The connected spotlights can be dimmed by a 2nd poti at the control housing.
If more than 10 spots are required the controller can be extended by „Slave“ module(s). These modules are then connected by a data BUS. This connection leads to synchronic colour effects of the whole illumination.
LINELIGHTS / LIGHT BATTENS
LED Linelight RGB frame IP 64
- Equipped with SMD-RGB LEDs, sealed with transpartent 2-component resin
- Aluminum Profile: W = 30 x H = 32 x L = XX mm
- Cut-out: W = 24 x H = 32 x L = XX mm
- Temperature range: -20°C bis +60°C max.
- Incl. connecting cable and plug
- Available lengths from 119 mm up to 3000 mm
LED RGB CONTROLLER/ TRANSFORMER FOR LINE LIGHTS
Controller for LED RGB Linelights with an operation voltage of 12 V/DC. You can connect up to 5 m of WDT Line Lights (max. 105 W) and additionally 10 WDT Spots to one RGB controller. In this case spots and line lights work absolutely synchronous. The controller can realize 15 different light programmes. For example: White (in stand-by), Red, Green, Blue, Red-Green color change, Blue-Green color change, Red-Green-Blue color change, Flashlights etc. The setting of the light programmes is done by a code switch. Optionally the light controller can be controlled externally by a four-digit digital code.
If more than 105 W are are required the controller can be extended by „Slave“ module(s).
SCOPE OF DELIVERY
- LED RGB control board installed in housing
- Code switch for the setting of the desired light programme
- 7 m cable from the controller to the 1st Line Light
- 1,5 m power supply cable with Euro plug